Red Paddle
Red Paddle Co Schrader iSUP Valve Adaptor for Electric Pumps
Red Paddle Co Schrader iSUP Valve Adaptor for Electric Pumps
| Availability: |
In Stock. Will ship within 2 business days.
Sold Out
|
| Shipping: | Shipping Calculated at Checkout |
Couldn't load pickup availability
Use this Schrader Valve Adaptor to connect your air compressor (or bike/tire pump) to your Red Paddle board.
Red Paddle boards use the universal Schrader value. This is the same valve that most inflatable boards use including Red Paddle Co, C4 Waterman, Airis, QuaGlide and Advance Elements.
Share
It works fast with a home compressor set to high pressure, but I strongly recommend you use an inflator nozzle with a built in pressure gauge to monitor your filling pressure regularly as you fill (a cheap Canadian Tire model on sale will work fine for this). It is not easy (or even possible) to unplug the hose and measure the pressure with an external pressure gauge since the adaptor does not push down on the SUP filler valve and just unplugging the hose will release pressure and will make any reading you get unreliable. If you set the compressor regulator below the maximum SUP pressure, you will be safe, but it will take longer to fill.
To verify the precision of your setup ,the first times fill it to an intermediate pressure then plug in your manual pump, pump a few strokes, and see what it's gauge is telling you. My filler gauge is a bit on the low side, which is safe, but your results might be on the high side.